Inception Designs High Flow 11/16ths Valve


Inception Designs High Flow 11/16ths Valve by Inception Designs at Awards Campaign. Hurry! Limited time offer. Offer valid only while supplies last. This is a modern high flow and very rapid closing valve that is available as an upgrade for any gun with an 11/16ths bore and is the standard valve that comes in all 11/16ths lower bore guns from Inception. Designed for better flow with a reduced valve stem and the gas port on one side only to prevent flow disruption. The gas port is size matched to the flow hole through the gun body for the best gas flow path possible and ported at 45 degrees. The valve has a fin stabilized molded cup seal for


Inception Designs High Flow 11/16ths Valve by Inception Designs
4.9 out of 5 stars with 29 reviews
Condition: New
Availability: In Stock
$49.95


Quantity:  

 


Product Description & Reviews

This is a modern high flow and very rapid closing valve that is available as an upgrade for any gun with an 11/16ths bore and is the standard valve that comes in all 11/16ths lower bore guns from Inception. Designed for better flow with a reduced valve stem and the gas port on one side only to prevent flow disruption. The gas port is size matched to the flow hole through the gun body for the best gas flow path possible and ported at 45 degrees. The valve has a fin stabilized molded cup seal for consistency and utilizes an o-ring sealed oversize stem that uses the pressure of the gas flowing through the valve to rapidly close the valve creating a much shorter and more consistent gas burst which in turn helps with efficiency, velocity consistency over the chronograph and helps make your gun as quiet as possible by reducing the wasted gas flow after the ball has already been accelerated.

Features & Highlights

Additional Information

Brand:
Inception Designs
Manufacturer:
Inception Designs
Category:
Autococker Accessories
UPC:
633841921144
Publisher:
Inception Designs
Binding:
Misc.

 


Have questions about this item (0633841921144), or would like to inquire about a custom or bulk order?


If you have any questions about this product by Inception Designs, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Name:
Email Address:
Your Message:

Related Best Sellers


ean: 0633841918915,
Depending on your combination of frame, body, and front block these may work with many different set ups.Stainless Steel. 4 Different Lengths Available. Perfect for Almost All Autocockers!.

ean: 0633841918342,
This polished stainless steel hammer is a ''MUST HAVE'' upgrade for the Empire Sniper and Empire Resurrection. It moves the hammer cocking point further back so the gun only cocks when the bolt has cleared the breech and will allow the next ball to d...

ean: 0633841918977,
Very easy to install thanks to the cross drilled hole that allows you to lock the arm in place by putting an allen key through the hole so that you can easily screw on the ram to the front or the back block to rear avoiding any ''idiot'' marks caused...

ean: 0633841919257,
The new Drift Pump kit is designed to be the ultimate pump kit. The kit comes with a Fully Fluted Stainless Steel Pump Guide - the flutes allow dirt and paint to be pushed out of the system to keep your pump stroke smooth even during the worst condit...